COLLECTION ONLY
A solution for hobby or occasional users for whom bottle rental charges from other gas bottle suppliers are uneconomical. A refundable deposit is payable on initial rental, and thereafter only the cost of the gas is payable on exchange for a full bottle. For obvious reasons, these bottles are for collection only.
These 20L bottles use the same regulator fittings as BOC, Air Products and Air Liquide.
Features
- Good penetration and fusion profiles
- Excellent arc stability
- Low distortion
- Low oxidation potential
- Low levels of nitrogen and moisture
Benefits
- Easy to use, providing a sound weld at minimum cost
- Low oxidation potential
- Can also be used for MIG welding stainless steel in less critical applications
- High strength welds
- Minimal splatter producing good appearance and finish
- Minimises post-weld treatment and rework
- Low porosity and other defects
Applications and uses
- Specially formulated for MIG welding sheet and mild steel less than 4mm thick
- A suitable gas for use in vehicle repair as it provides dip transfer in all positions with solid wire
- The oxidising potential of this mixture has a tendency to produce welds with a black surface film, so generally not recommended for stainless steel applications.
Cylinder Gas Pressure - 230 bar (circa 3335psi) at 15°C
Gas Capacity - 5.09m3 average (20 litre water capacity)
Dimensions:
Height - 950mm
Diameter - 200mm
*Cylinder weights and dimensions may vary slightly - contents remain balanced*
See Hobbyweld Rent Free Welding Gas for more information
COLLECTION ONLY